66 Processor Heat-Sink
Procedure
1
Remove the screw that secures the processor heat-sink to the chassis.
2
In sequential order (indicated on the processor heat-sink), loosen the
captive screws that secure the processor heat-sink to the system board.
3
Peel the portion of the aluminum foil that is adhered over the
processor heat-sink fan.
4
Lift the processor heat-sink off the system board.
1 screw 2 aluminum foil
3 processor heat-sink 4 captive screws (4)
OM_Book.book Page 66 Friday, March 30, 2012 1:21 PM
To Next Page
Loading...
