70 Processor Heat-Sink Fan
Procedure
1
Disconnect the processor heat-sink fan cable from the
system-board connector.
2
Remove the screws that secure the processor heat-sink fan to the chassis.
3
Peel the portion of the aluminum foil that is adhered over the
processor heat-sink.
4
Lift the processor heat-sink fan off the chassis
1 aluminum foil 2 processor heat-sink fan
3 screws (3) 4 processor heat-sink fan cable
OM_Book.book Page 70 Friday, March 30, 2012 1:21 PM
To Next Page
Loading...
