Dell Inspiron One 2330 - Page 86

86 I/O Board Shield
Procedure
1 Remove the screws that secure the power port to the I/O board shield.
2 Remove the screw that secures the power supply control board to the
I/O board shield.
3 Remove the screws that secure the I/O board shield to the chassis.
4 Turn the I/O board shield over and place it on the hard-drive cage.
1 power-supply control board 2 screws (7)
3 power port 4 I/O board shield
4
1
2
3
OM_Book.book Page 86 Friday, March 30, 2012 1:21 PM