Dell Latitude 3301 - Pre- and Post-Service Procedures

Before working inside your computer
NOTE: The images in this document may dier from your computer depending on the conguration you ordered.
After working inside your computer
CAUTION: Leaving stray or loose screws inside your computer may severely damage your computer.
1 Replace all screws and ensure that no stray screws remain inside your computer.
2 Connect any external devices, peripherals, or cables you removed before working on your computer.
3 Replace any media cards, discs, or any other parts that you removed before working on your computer.
4 Connect your computer and all attached devices to their electrical outlets.
5 Turn on your computer.
6 Working on your computer