2. Lift the SIM card slot filler out of the system.
Installing the SIM card slot filler
Prerequisites
If you are replacing a component, remove the necessary component before the installation procedure.
About this task
The following image provides a visual representation of the SIM card slot filler installation procedure.
Steps
1. Place the SIM card slot filler into its compartment on the palm rest ensuring that the SIM card slot filler is aligned with the
ribs on the palm rest.
2. Press the SIM card slot filler until you hear it click ensuring it fits securely into the SIM card slot filler.
Next steps
Follow the procedure in after working inside your computer.
Palm-rest assembly
Removing the palm-rest
Prerequisites
NOTE:
For models with smart card reader configuration, the smart card reader is preinstalled in the replacement palm-rest
assembly.
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the SIM card.
114
Removing and installing components
To Next Page
Loading...
