Next steps
1. Install the WWAN card (optional).
2. Install the WLAN card.
3. Install the 3-cell battery or 4-cell battery.
4. Install the base cover.
5. Follow the procedure in after working inside your computer.
Display bezel
Removing the display bezel
Prerequisites
NOTE: The display bezel removal procedure is applicable only for Latitude 5330 laptop and not for the 2-in-1 configuration.
1. Follow the procedure in before working inside your computer.
2. Remove the base cover.
3. Remove the 3-cell battery or 4-cell battery.
4. Remove the display assembly.
About this task
The following images indicate the location of the display bezel and provide a visual representation of the removal procedure.
84
Removing and installing components
To Next Page
Loading...
