Next steps
1. Install the WWAN card (optional).
2. Install the WLAN card.
3. Install the 3-cell battery or 4-cell battery.
4. Install the base cover.
5. Follow the procedure in after working inside your computer.
Removing the display assembly (2-in-1)
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the base cover.
3. Remove the 3-cell battery or 4-cell battery.
4. Remove the WLAN card.
5. Remove the WWAN card (optional).
About this task
The following images indicate the location of the display assembly for 2-in-1 and provide a visual representation of the removal
procedure.
76 Removing and installing components
To Next Page
Loading...
