NOTE: The system board can be removed with the heat sink attached in order to simplify the procedure and preserve
the thermal bond between the system board and heat sink.
9. Remove the power button or power button with optional fingerprint reader.
10. Remove the smart card reader (optional).
11. Remove the speakers.
12. Remove the display assembly (laptop) or display assembly (2-in-1).
About this task
NOTE: The system board can be removed with the heat sink attached in order to simplify the procedure and preserve the
thermal bond between the system board and heat sink.
The following images indicate the location of the keyboard assembly and provide a visual representation of the removal
procedure.
Removing and installing components 63
To Next Page
Loading...
