3 Install the: Batteries
4 Follow the procedure in After working inside your computer.
SSD
Removing the SSD from carrier
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a Batteries.
b SSD(Primary or Secondary).
3 Remove the two 'M2*5' screws [1] and ip over the SSD carrier [2].
4 Remove the single 'M2*5' screw [3] and separate the cover from the SSD carrier [4].
5 Separate the SSD and interposer [1] from the SSD carrier tray.
6 Flip over the assembly and disconnect the SSD from the interposer [3].
Removing and installing components
115
To Next Page
Loading...
