3 Install the:
a Bottom chassis cover
b Batteries
4 Follow the procedure in After working inside your computer.
Global Positioning System (GPS)
Removing the GPS module
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a Batteries
b Bottom chassis cover
3 Unroute the aux cables [1] for WLAN and WWAN and disconnect the antennae cable [2] on GPS module.
4 Unroute the main antennae cables [3] and loosen the single 'M2.5*5' screw [4] to separate the RF bracket [5] from the system board.
Removing and installing components
121
To Next Page
Loading...
