3 Follow the procedure in After working inside your computer.
System board
Removing the System board
NOTE: This system cannot be disassembled further. To access underlying components, replace the base assembly as per order
details.
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a Batteries
b Bottom chassis cover
c Keyboard
d PCIe heatsink assembly
e Docking port assembly
f Primary SSD
g Secondary SSD
h Heat Sink
i Memory
j WLAN card
k WWAN card
l GPS module
m Primary SSD rail
n Battery bay
o Rear I/O board
3 Peel o the tape [1], disconnect the SSD-ODD assembly [2] from the system board.
4 Peel o the tape [3] from touch pad connectors and disconnect it from the system board [4].
5 Peel o the tape [1] and disconnect the rear I/O board FPC connector [2] from the system board.
6 Peel o the tape [3] and disconnect the battery indicator LED cable [4].
7 Peel o the tape [5] and disconnect the dock board FPC connector [6] from the system board.
Removing and installing components
167
To Next Page
Loading...
