Installing the SSD in carrier
1 Connect the SSD to the interposer [1], ip over [2].
2 Install the SSD with interposer on the SSD carrier tray preassembled with new thermal pad [3].
3 Install the cover [1] on the SSD carrier and install the single 'M2*5' screw [2].
4 Flip over the SSD carrier [3] and tighten the two 'M2*5' screws [4] securing the cover to the SSD carrier.
5 Install the:
a SSD(Primary or Secondary).
b Batteries
6 Follow the procedure in After working inside your computer.
116
Removing and installing components
To Next Page
Loading...
