a base cover
b battery
3 To remove the WLAN card:
a Remove the M2.0x3.0 screw that secures the WLAN card to the computer [1].
b Remove the metal tab that secures the WLAN cables [2].
c Disconnect the WLAN cables from the connectors on the WLAN card [3].
NOTE
: The WLAN card is help in place with an adhesive foam spacer.
d Lift the WLAN card to release it from the adhesive[4].
GUID-7276DCB7-9433-4591-BDD9-C2ECD193E789
Installing the WLAN card
1 Insert the WLAN card into the slot on the computer.
2 Route the WLAN cables through the routing channel.
3 Connect the WLAN cables to the connectors on the WLAN Card.
4 Place the metal bracket and tighten the M2.0x3.0 screw to secures it to the computer.
5 Install the:
a battery
b base cover
6 Follow the procedure in After working inside your system.
Removing and installing components 19
Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: info@andpro.ru
При обращении используйте промокод AND-PDF и получите скидку.