GUID-7E6DA49B-F0BD-4FC4-9A78-01AA77B72EE1
Installing the display panel
These instructions are applicable only for a non-touch screen.
1 Connect the eDP cable to the connector and ax the blue tape.
2 Ax the adhesive tape to secure the eDP cable.
3 Replace the display panel to align with the screw holders on the display assembly.
4 Tighten the M2.0x3.0 screws to secure the display panel to the display assembly.
5 Install the:
a display bezel
b display assembly
c hinge cap
d WWAN card
e WLAN card
f battery
g base cover
6 Follow the procedure in After working inside your computer.
Removing and installing components 53
Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: info@andpro.ru
При обращении используйте промокод AND-PDF и получите скидку.