Dell Latitude 5580 - Installing the Display Assembly; Display Bezel; Removing the Display Bezel

GUID-1AAF2B1F-E442-482F-91BB-028388EFD0DE
Installing the display assembly
1 Place the display assembly to align with the screw holders on the computer.
2 Tighten the M2.0x5.0 screws to secure the display assembly to the computer.
3 Turn over the computer.
4 Route the display cable through the routing channel and route the antenna cables by pushing it through the hole.
5 Connect the antenna cables and display cable to the connectors.
6 Place the display cable bracket over the connector and tighten the M2.0x5.0 screws to secure the display cable to the computer.
7 Connect eDP cable.
8 Route the WLAN cables through the routing channels.
9 Install the:
a hinge cap
b WWAN card
c WLAN card
d battery
e base cover
10 Follow the procedure in After working inside your computer
.
GUID-00515E4D-657E-4F38-9C17-9C710680C719
Display bezel
GUID-CE47B64C-C088-4E23-BECA-59EB2AE82A97
Removing the display bezel
These instructions are applicable only for a non-touch screen.
1 Follow the procedure in Before working inside your computer
.
2 Remove the:
a base cover
b battery
c WWAN card
d WLAN card
e hinge cap
f display assembly
3 Pry the edges to release the display bezel from the display assembly.
48 Removing and installing components
Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: info@andpro.ru
При обращении используйте промокод AND-PDF и получите скидку.