Dell Latitude 5580 - Touchpad panel

GUID-CF4CE79E-1099-4E11-A532-74FBE89E0E11
Installing the system board
1 Align the system board with the screw holders on the computer.
2 Tighten the M2.0x3.0 screws to secure the system board to the computer.
3 Place the metal bracket and tighten the M2.0x5.0 screws on the system board.
4 Connect the LED, mother board and touchpad cable to the system board.
5 Connect the power cable.
6 Connect the display cable on the system board.
7 Place the metal and tighten the M2.0x3.0 screws that secure the display assembly on the system board.
8 Connect the IR camera cable.
9 Install the:
a chassis frame
b coin cell battery
c heat sink
d system fan
e memory module
f SSD card
or
hard drive
g WWAN card
h WLAN card
i battery
j base cover
k SIM card module
10 Follow the procedure in After working inside your computer.
GUID-2F046B6B-9C41-47E4-AA91-3DEC7B1E3D85
Touchpad panel
GUID-99588A23-13B2-41E6-9140-9912A2999EAF
Removing the touchpad panel
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
c WLAN card
d WWAN card
e SSD card
or
hard drive
f chassis frame
3 To release the touchpad panel:
a Lift the latch and disconnect the SmartCard reader cable from the connector [1].
b Peel o
 the SmartCard reader cable from the adhesive [2].
Removing and installing components 35
Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: info@andpro.ru
При обращении используйте промокод AND-PDF и получите скидку.