GUID-25F678E2-5E75-4DD2-8D53-DC9AE9F313C8
Installing the display hinge
These instructions are applicable only for a non-touch screen.
1 Place the display hinge cover on the display assembly.
2 Tighten the M2.5x3.5 screw to secure the display hinge cover to the display assembly.
3 Repeat the same procedure to install the other display hinge cover.
4 Install the:
a hinge cap
b display bezel
c display assembly
d hinge cap
e WWAN card
f WLAN card
g battery
h base cover
5 Follow the procedure in After working inside your computer.
GUID-E0788C61-C654-46B3-8D36-621573FA8111
Display panel
GUID-C923FB2C-A750-4AB8-B968-5D7B532E0337
Removing the display panel
These instructions are applicable only for a non-touch screen.
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
c WWAN card
d WLAN card
e hinge cap
f display assembly
g display bezel
3 Remove the M2.0x3.0 screws that secure the display panel to the display assembly [1] and lift to turn over the display panel to access
the eDP cable [
2].
Removing and installing components 51
Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: info@andpro.ru
При обращении используйте промокод AND-PDF и получите скидку.