GUID-6F3B8098-3A5F-493F-82A3-C96B568C09A9
Installing the eDP cable
These instructions are applicable only for a non-touch screen.
1 Ax the eDP cable on the display assembly
.
2 Install the:
a display panel
b display bezel
c display assembly
d WWAN card
e WLAN card
f battery
g base cover
3 Follow the procedure in After working inside your computer.
GUID-B2F0CB60-3ABC-4810-802B-5FAA7A1515DC
Camera
GUID-161A8916-31E2-4424-99E8-793A26AD39EF
Removing the camera
These instructions are applicable only for a non-touch screen.
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
c WLAN card
d WWAN card
e display assembly
f display bezel
g display panel
3 To remove the camera:
a Disconnect the camera cable from the connector [1].
b Lift the camera away from the display [2].
Removing and installing components 55
Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: info@andpro.ru
При обращении используйте промокод AND-PDF и получите скидку.