Table 37. System setup options—Integrated Devices menu(continued)
Integrated Devices
Enable Thunderbolt (and PCIe behind
TBT) pre-boot modules
Enables the PCIe devices that are connected through a Thunderbolt adapter to
run the PCIe devices UEFI Option ROM (if present) during preboot.
By default, the Enable Thunderbolt (and PCIe behind TBT) pre-boot
modules option is disabled.
Disable USB4 PCIE Tunneling Disables the USB4 PCIE Tunneling option.
By default, the Disable USB4 PCIE Tunneling option is disabled.
Video/Power only on Type-C Ports Enables or disables the Type-C port functionality to video or only power.
By default, the Video/Power only on Type-C Ports option is disabled.
Type-C Dock
Type-C Dock Override Enables or disables to use connected Type-C Dell Dock to provide data stream
with external USB ports disabled. When Type-C Dock override is enabled, the
Video/Audio/LAN submenu is activated.
By default, the Type-C Dock Override option is enabled.
Type-C Dock Audio Enables or disables the usage of audio inputs and outputs from the connected
Type-C Dell docking station.
By default, the Type-C Dock Audio option is enabled.
Type-C Dock LAN Enables or disables the usage of LAN on the external ports of the connected
Type-C Dell docking station.
By default, the Type-C Dock LAN option is enabled.
Miscellaneous Devices
Enable Fingerprint Reader Device Enables the Fingerprint Reader Device option.
By default, the Enable Fingerprint Reader Device option is enabled.
Unobtrusive Mode
Enable Unobtrusive Mode Enables the Unobtrusive Mode.
By default, the Unobtrusive Mode option is disabled.
Table 38. System setup options—Storage menu
Storage
SATA/NVMe Operation
SATA/NVMe Operation Sets the operating mode of the integrated SATA hard drive controller.
By default, the RAID On option is selected. The storage device is configured for
AHCI/NVMe mode.
Storage Interface Displays the information of various onboard drives.
Port Enablement Enables or disables the M.2 PCIe SSD option.
By default, the M.2 PCIe SSD option is enabled.
Enable SMART Reporting Enables or disables the SMART Reporting.
By default, the SMART Reporting option is disabled.
Drive Information Displays the information of onboard drives.
BIOS Setup 121
To Next Page
Loading...
