Next steps
1. Install the display panel.
2. Install the display assembly.
3. Install the battery.
4. Install the base cover.
5. Follow the procedure in after working inside your computer.
Display back cover
Replacing display back cover and antenna assembly
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the base cover.
3. Remove the battery.
4. Remove the display assembly.
5. Remove the display bezel.
6. Remove the display panel.
7. Remove the display hinges.
8. Remove the display cable.
9. Remove the camera.
Steps
The component you are left with is the display back-cover and antenna assembly after performing the pre-removal parts procedures.
70
Removing and Installing