10
About your monitor
Back view
8
1
2
3
4
65 7
Figure 2. Back view of the monitor
Table 5. Components and descriptions.
Label Description Function
1
VESA mounting holes
(100 mm x 100 mm-behind
attached VESA cover)
Wall mount monitor using VESA-compatible wall mount kit.
2
Regulatory information label Lists the regulatory approvals.
3
Stand release button Releases the stand from the monitor.
4
Regulatory label (including
Mac address, Barcode, serial
number, and Service Tag label)
Refer to this label if you need to contact Dell for technical support. The Service Tag is a
unique alphanumeric identifier that enables Dell service technicians to identify the hardware
components in your computer and access warranty information.
5
Power On/Off button To turn the monitor on or off.
6
Joystick Use it to control the OSD menu.
For more information, see Operating the monitor.
7
Dell soundbar mounting slots Attaches the optional Dell soundbar.
8
Cable-management slot Use to organize cables by routing them through the slot.
To Next Page
