Replacing the camera
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
NOTE: These instructions are only applicable for laptop with non-touchscreen display.
1. Using the alignment post, adhere the camera to the display back-cover.
2. Connect the camera cable to the camera connector.
Post-requisites
1. Replace the display bezel.
2. Replace the display assembly.
3. Replace the wireless card.
4. Replace the battery.
5. Replace the base cover.
6. Replace the optical drive.
46
Replacing the camera 79
To Next Page
Loading...
