Replacing the display cable
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
1. Route the display cable through the routing guides on the display back-cover.
2. Adhere the camera cable to the display back-cover.
3. Connect the camera cable to the camera module.
4. Align the screw holes on the right display hinges with the screw holes on the display panel.
5. Replace the screws that secure the display hinges to the display panel.
Post-requisites
1. Replace the display panel.
2. Replace the display bezel.
3. Replace the display assembly.
4. Replace the wireless card.
5. Replace the battery.
6. Replace the base cover.
7. Replace the optical drive.
48
82 Replacing the display cable
To Next Page
Loading...
