Dell P74F002 - Installing the Edp Cable

h. palmrest
i. display assembly
j. display bezel
k. display panel
3. To remove eDP cable:
a. Peel the adhesive tape covering the camera module [1].
b. Disconnect the eDP cable from the camera module [2].
c. Peel the eDP cable from the display cover and unroute the cable from the routing channels [3].
d. Remove the eDP cable from the system.
Installing the eDP cable
1. To install eDP cable:
a. Route and affix the eDP cable on the display cover [3].
b. Connect the eDP cable to the connector on the camera module [2].
c. Affix the adhesive tape covering the camera module [1].
96
Removing and installing components