Dell P75F - Replacing the I;O Board; Procedure; Post-Requisites

Identifier GUID-98F27B1C-9F09-48EC-83D7-FC85C825E6A4
Status Released
Replacing the I/O board
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-6997EB7F-49CB-4F37-BBE7-29C988E3C66D
Status Released
Procedure
1 Using the alignment posts, place the I/O board on the palm rest and keyboard assembly.
2 Replace the screw (M2x4) that secures the I/O board to the palm rest and keyboard assembly.
3 Connect the I/O-board cable to the system board and close the latch to secure the cable.
4 Connect the coin-cell battery cable to the I/O board.
Identifier GUID-892E2EFE-6441-459A-A52A-D17FA617E403
Status Released
Post-requisites
1 Replace the hard drive.
2 Replace the battery.
33
Replacing the I/O board 67