Installing System Components 51
Installing System Components
This section describes how to install the following system components:
• Hard drives
• Power supplies
• System fans
• SAS controller daughter card
• RAID battery
• Internal USB memory key connector
• Expansion cards
• Expansion card cage
• Cooling shroud
• Fan bracket
• RAC card
• Optical, diskette, and tape drives
• System memory
• Processors
• System battery
• Expansion-card riser boards
• Sideplane board
• SAS/SATA Backplane board
• Control panel assembly
• System board
Recommended Tools
You may need the following items to perform the procedures in this section:
• Key to the system keylock
• #1 and #2 Phillips screwdrivers
• T-10 Torx driver
• Wrist grounding strap
To Next Page
