Table 81. PCIe Riser Configurations (continued)
Config
uratio
n
numbe
r
RSR
Config
uratio
n
No. of
CPUs
PERC
type
suppo
rted
Rear
Storage
Possible
x8 CPU 1
Slot1 LP
x8 CPU
2 Slot2
LP
x16 CPU
1 Slot1
LP
x16 CPU
1 Slot2
LP
x16 CPU
1 Slot3
LP
x16 CPU
1 Slot1
FH
x16 CPU
1 Slot2
FH
5 R3P 1 Front
PERC
Yes 0 0 0 0 1 (Gen 5) 0 0
6 R2A 1 Front
PERC
No 1 (Gen 4) 1 (Gen 4) 0 0 0 0 0
7 R2U+R
3A
1 Front
PERC
Yes 0 0 1 (Gen 5) 0 1 (Gen 5) 0 0
8 R2T+R
3A
1 Front
PERC
Yes 0 0 1 (Gen 5) 1 (Gen 4) 1 (Gen 4) 0 0
NOTE: The expansion-card slots are not hot-swappable.
The following table provides guidelines for installing expansion cards to ensure proper cooling and mechanical fit. The expansion
cards with the highest priority should be installed first using the slot priority indicated. All the other expansion cards should be
installed in the card priority and slot priority order.
Table 82. Config0. No RSR
CARD TYPE SLOT PRIORITY MAXIMUM NUMBER OF CARDS
FOXCONN (Front PERC) Integrated slot 1
FOXCONN (Front PERC) Integrated slot 1
Inventec (LOM Card) Integrated slot 1
Inventec (LOM Card) Integrated slot 1
Intel (OCP: 25Gb) Integrated slot 1
Intel (OCP: 25Gb) Integrated slot 1
Mellanox (OCP: 25Gb) Integrated slot 1
Broadcom (OCP: 25Gb) Integrated slot 1
Broadcom (OCP: 25Gb) Integrated slot 1
Broadcom (OCP: 25Gb) Integrated slot 1
Broadcom (OCP: 25Gb) Integrated slot 1
Broadcom (OCP: 10Gb) Integrated slot 1
Broadcom (OCP: 10Gb) Integrated slot 1
Intel (OCP: 10Gb) Integrated slot 1
Intel (OCP: 10Gb) Integrated slot 1
Broadcom (OCP: 10Gb) Integrated slot 1
Broadcom (OCP: 1Gb) Integrated slot 1
Intel (OCP: 1Gb) Integrated slot 1
Broadcom (OCP: 1Gb) Integrated slot 1
FOXCONN (BOSS) Integrated slot 1
FOXCONN (BOSS) Integrated slot 1
116 Installing and removing system components
To Next Page
Loading...
