Dell PowerEdge R6615 - Removing the Expansion Card Risers

Table 90. Config8. R2T + R3A (continued)
CARD TYPE SLOT PRIORITY MAXIMUM NUMBER OF CARDS
Intel (NIC: 25Gb) 1,2,3 3
Mellanox (NIC: 25Gb) 1,2,3 3
Broadcom (NIC: 25Gb) 1,2,3 3
Broadcom (HBA: FC64) 1,2,3 3
Broadcom (HBA: FC32) 1,2,3 3
Broadcom (HBA: FC32) 1,2,3 3
Marvell (HBA: FC32) 1,2,3 3
Marvell (HBA: FC32) 1,2,3 3
Broadcom (NIC: 10Gb) 1,2,3 3
Broadcom (NIC: 10Gb) 1,2,3 3
Intel (NIC: 10Gb) 1,2,3 3
Intel (NIC: 10Gb) 1,2,3 3
Intel (NIC: 1Gb) 1,2,3 3
Broadcom (NIC: 1Gb) 1,2,3 3
Mellanox (NIC: NDR200) 1,2,3 3
Mellanox (NIC: HDRV) 1,2,3 3
Intel (OCP: 25Gb) INT 1
Intel (OCP: 25Gb) INT 1
Mellanox (OCP: 25Gb) INT 1
Broadcom (OCP: 25Gb) INT 1
Broadcom (OCP: 25Gb) INT 1
Broadcom (OCP: 25Gb) INT 1
Broadcom (OCP: 25Gb) INT 1
Broadcom (OCP: 10Gb) INT 1
Broadcom (OCP: 10Gb) INT 1
Intel (OCP: 10Gb) INT 1
Intel (OCP: 10Gb) INT 1
Broadcom (OCP: 10Gb) INT 1
Broadcom (OCP: 1Gb) INT 1
Intel (OCP: 1Gb) INT 1
Broadcom (OCP: 1Gb) INT 1
FOXCONN (BOSS) INT 1
FOXCONN (BOSS) INT 1
Removing the expansion card risers
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
Installing and removing system components
127