Dell PowerEdge T310 - Installing a RAID Battery

Installing System Components 133
Figure 3-25. Removing and Installing the RAID Battery
Installing a RAID Battery
1 Insert the RAID battery into the battery carrier. See Figure 3-25.
2 Align the tabs on the battery carrier with the battery carrier slots
on the chassis.
3 Slide the battery carrier into the battery carrier slots until it locks
into place. See Figure 3-25.
1 battery cable connector 2 battery carrier slots (2)
3 battery carrier 4 battery carrier tabs
5 battery carrier release tab 6 RAID battery
2
3
4
5
6
1
book.book Page 133 Wednesday, August 19, 2009 4:40 PM