164 Troubleshooting Your System
5
Ensure that each processor and heat sink are properly installed.
See "Installing a Processor" on page 129.
6
Replace the cooling shroud. See "Installing the Cooling Shroud" on
page 89.
7
Close the system. See "Closing the System" on page 86.
8
Reconnect the system to the electrical outlet, and turn on the system and
attached peripherals.
9
Run the appropriate online diagnostic test.
If a problem is still indicated, see "Getting Help" on page 177.
book.book Page 164 Wednesday, August 19, 2009 4:40 PM
To Next Page
Loading...
