32 About Your System
E1711 PCI parity
error on Bus
## Device ##
Function ##
The system BIOS has
reported a PCI parity error
on a component that
resides in PCI
configuration space at
bus ##, device ##,
function ##.
Remove and reseat the
PCIe expansion cards.
If the problem persists,
see "Troubleshooting
Expansion Cards" on
page 162.
PCI parity
error on Slot
#. Review &
clear SEL.
The system BIOS has
reported a PCI parity error
on a component that
resides in the specified slot.
Remove and reseat the
PCIe expansion cards.
If the problem persists,
see "Troubleshooting
Expansion Cards" on
page 162.
E1712 PCI system
error on Bus
## Device ##
Function ##
The system BIOS has
reported a PCI system
error on a component
that resides in PCI
configuration space at
bus ##, device ##,
function ##.
Remove and reseat the
PCIe expansion cards.
If the problem persists,
see "Troubleshooting
Expansion Cards" on
page 162.
E1714 Unknown
error. Review
& clear SEL.
The system BIOS has
determined there has
been an error in the
system, but is unable to
determine its origin.
Check the SEL for more
information and then
clear the SEL.
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Getting Help" on
page 177.
Table 1-2. LCD Status Messages (continued)
Code Text Causes Corrective Actions
book.book Page 32 Wednesday, August 19, 2009 4:40 PM
To Next Page
Loading...
