Dell PowerVault ML6000 - Chapter 1. Tape Encryption Overview; Components

Dell PowerVault ML6000 Basic SNMP Reference Guide 7
MIB Variables - Drive Information
You can poll the variables in this section to obtain information about drives on the library. The drive variables
fall into the following categories:
• Physical Drive Information
• Library Interfaces - Fibre Channel
• Library Interfaces - SAS
• Library Interfaces - SCSI
Physical Drive Information
Physical Drive Readiness
Name: overallPhDriveReadinessStatus
Type: OBJECT-TYPE
OID: 1.3.6.1.4.1.3764.1.10.10.11.1
Full path:
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).adic(3764).storage(1).library(10).tapeLibraryMIB(
10).physicalDrive(11).overallPhDriveReadinessStatus(1)
Module: ADIC-TAPE-LIBRARY-MIB
Parent: physicalDrive
Next sibling: physicalDriveTable
Numerical syntax: Integer (32 bit)
Base syntax: INTEGER
Composed syntax: OnlineState
NOTE: All variables share the same object ID (OID) prefix of:
1.3.6.1.4.1.3764.1.10.10