Dell PowerVault ML6000 - Blade Host Port Failover Map Active Port; Blade Host Port Failover Physical Table; Blade Host Port Failover Physical Port

Dell PowerVault ML6000 Basic SNMP Reference Guide 67
Description: The comma-seperated list of ports that are configured as standbys for the virtual port (
excluding the primary port).
Blade Host Port Failover Map Active Port
Name: blHPFMapActivePort
Type: OBJECT-TYPE
OID: 1.3.6.1.4.1.3764.1.10.10.16.6.1.4
Full path:
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).adic(3764).storage(1).library(10).tapeLibraryMIB(
10).bladeInterfaces(16).blHPFMapTable(6).blHPFMapEntry(1).blHPFMapActivePort(4)
Module: ADIC-TAPE-LIBRARY-MIB
Parent: blHPFMapEntry
Prev sibling: blHPFMapStandbyList
Numerical syntax: Integer (32 bit)
Base syntax: INTEGER
Composed syntax: INTEGER
Status: mandatory
Max access: read-only
Description: The physical port that is active on this virtual port.
Blade Host Port Failover Physical Table
Blade Host Port Failover Physical Port
Name: blHPFPhysicalPort
Type: OBJECT-TYPE
OID: 1.3.6.1.4.1.3764.1.10.10.16.7.1.1
Full path:
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).adic(3764).storage(1).library(10).tapeLibraryMIB(
10).bladeInterfaces(16).blHPFPhysicalTable(7).blHPFPhysicalEntry(1).blHPFPhysicalPort(1)
Module: ADIC-TAPE-LIBRARY-MIB
Parent: blHPFPhysicalEntry
Next sibling: blHPFPhysicalPortFailureType
Numerical syntax: Integer (32 bit)
Base syntax: INTEGER
Composed syntax: INTEGER
Status: mandatory
Max access: read-only
Description: The physical FC port index.