Dell PowerVault ML6000 - A Mibs Implemented; Dell Tape Library MIB; Reference Mibs

Dell PowerVault ML6000 Basic SNMP Reference Guide 81
MIBs Implemented
The library requires five Management Information Bases (MIBs): the Dell Tape Library MIB and four
standard SNMP MIBs.
Dell Tape Library MIB
The Dell Tape Library MIB provides the following information:
• System identification (library model and serial number)
• Notifications for a changed configuration (added and removed components)
• Library startup and shutdown traps
• Library online and offline status
• Library composition
– Drives
– Robotics
– Fibre Channel I/O Blades
• Library partitioning
• Advanced status information: Reliability, Availability and Serviceability (RAS) functionality
Reference MIBs
The library MIBs reference the following SNMP standard MIBs:
• IPV6-MIB of MIB II
• IP-MIB of MIB II
• RFC 1155-SMI
• RFC 1212
• RFC 1213-MIB
• RFC 1215
These MIBs must be included with your framework application. They are required for accurate compilation
of the library MIBs.