Dell PowerVault ML6000 - Library SNMP Agent Description; Library Name

30 MIB Variables - Library System Information
Description: The IP address this SNMP agent. If the library has only an IPv4 address, or both an IPv4 and
an IPv6 address, then the IP address is displayed in IPv4 format (xxx.xxx.xxx.xxx). If the library only has an
IPv6 address, then it will report an IPv6 format address.
Library SNMP Agent Description
Name: librarySNMPAgentDescription
Type: OBJECT-TYPE
OID: 1.3.6.1.4.1.3764.1.10.10.1.2
Full path:
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).adic(3764).storage(1).library(10).tapeLibraryMIB(
10).tapeLibrarySystem(1).librarySNMPAgentDescription(2)
Module: ADIC-TAPE-LIBRARY-MIB
Parent: tapeLibrarySystem
Prev sibling: libraryIpAddress
Next sibling: libraryName
Numerical syntax: Octets
Base syntax: OCTET STRING
Composed syntax: DisplayString
Status: current
Max access: read-only
Description: Description of the library SNMP agent.
Library Name
Name: libraryName
Type: OBJECT-TYPE
OID: 1.3.6.1.4.1.3764.1.10.10.1.3
Full path:
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).adic(3764).storage(1).library(10).tapeLibraryMIB(
10).tapeLibrarySystem(1).libraryName(3)
Module: ADIC-TAPE-LIBRARY-MIB
Parent: tapeLibrarySystem
Prev sibling: librarySNMPAgentDescription
Next sibling: libraryVendor
Numerical syntax: Octets
Base syntax: OCTET STRING
Composed syntax: DisplayString
Status: current
Max access: read-only
Description: The host name for the system hosting the SNMP agent.