Dell PowerVault ML6000 - Blade Fibre Channel Controller Loop ID Mode; Blade Fibre Channel Controller Port Mode; Blade Fibre Channel Controller Connection Options

Dell PowerVault ML6000 Basic SNMP Reference Guide 61
Blade Fibre Channel Controller Loop ID Mode
Name: blFcCtlrLoopIDMode
Type: OBJECT-TYPE
OID: 1.3.6.1.4.1.3764.1.10.10.16.4.1.5
Full path:
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).adic(3764).storage(1).library(10).tapeLibraryMIB(
10).bladeInterfaces(16).blFcCtlrTable(4).blFcCtlrEntry(1).blFcCtlrLoopIDMode(5)
Module: ADIC-TAPE-LIBRARY-MIB
Parent: blFcCtlrEntry
Prev sibling: blFcCtlrLoopID
Next sibling: blFcCtlrPortMode
Numerical syntax: Integer (32 bit)
Base syntax: INTEGER
Composed syntax: FCPortLoopIdMode
Status: mandatory
Max access: read-only
Description: Fibre Channel Loop ID mode (soft or hard).
Blade Fibre Channel Controller Port Mode
Name: blFcCtlrPortMode
Type: OBJECT-TYPE
OID: 1.3.6.1.4.1.3764.1.10.10.16.4.1.6
Full path:
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).adic(3764).storage(1).library(10).tapeLibraryMIB(
10).bladeInterfaces(16).blFcCtlrTable(4).blFcCtlrEntry(1).blFcCtlrPortMode(6)
Module: ADIC-TAPE-LIBRARY-MIB
Parent: blFcCtlrEntry
Prev sibling: blFcCtlrLoopIDMode
Next sibling: blFcCtlrConnectionOptions
Numerical syntax: Integer (32 bit)
Base syntax: INTEGER
Composed syntax: FibrePortMode
Status: mandatory
Max access: read-only
Description: Fibre Channel port mode.
Blade Fibre Channel Controller Connection Options
Name: blFcCtlrConnectionOptions
Type: OBJECT-TYPE
OID: 1.3.6.1.4.1.3764.1.10.10.16.4.1.7