Dell PowerVault ML6000 - Using the GUI to Create a Configuration File, Keystore, and Certificates

Dell PowerVault ML6000 Basic SNMP Reference Guide 29
MIB Variables - Library System Information
You can poll the variables in this section to obtain information about the library. The Library System
Information variables contain the following subsystems:
• Tape Library System
• Physical Library
• Logical Library
• Fibre Channel I/O Blade Interfaces
Tape Library System
Library IP Address
Name: libraryIpAddress
Type: OBJECT-TYPE
OID: 1.3.6.1.4.1.3764.1.10.10.1.1
Full path:
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).adic(3764).storage(1).library(10).tapeLibraryMIB(
10).tapeLibrarySystem(1).libraryIpAddress(1)
Module: ADIC-TAPE-LIBRARY-MIB
Parent: tapeLibrarySystem
Next sibling: librarySNMPAgentDescription
Numerical syntax: Octets
Base syntax: OCTET STRING
Composed syntax: DisplayString
Status: current
Max access: read-only
NOTE: All variables share the same object ID (OID) prefix of:
1.3.6.1.4.1.3764.1.10.10