Dell PowerVault ML6000 - Page 94

88 MIBs Implemented
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IP address of this SNMP agent. If the
library has only an IPV4 address, or both an
IPV4 and an IPV6 address, the the IP address is
displayed in IPV4 format (xxx.xxx.xxx.xxx). If
the library only has an IPV6 address, then it
will report an IPV6 address."
::= { tapeLibrarySystem 1 }
librarySNMPAgentDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Description of the library SNMP agent."
::= { tapeLibrarySystem 2 }
libraryName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The host name for the system hosting the SNMP
agent."
::= { tapeLibrarySystem 3 }
libraryVendor OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Name of Library vendor"
::= { tapeLibrarySystem 4 }
librarySerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Library Serial Number."