Troubleshooting Your System 133
• VFlash media cards
• USB memory keys
• NIC hardware key
• Expansion-card risers
• Integrated storage controller card
• iDRAC6 Express card
• iDRAC6 Enterprise card
• Power supplies
•Fans
• Processors and heat sinks
• Memory modules
4
Let the system dry thoroughly for at least 24 hours.
5
Reinstall the components you removed in step 3.
6
Close the system. See "Closing the System" on page 67.
7
Reconnect the system to the electrical outlet, and turn on the system and
attached peripherals.
If the system does not start properly, see "Getting Help" on page 157.
8
If the system starts properly, shut down the system and reinstall all of the
expansion cards that you removed. See "Installing an Expansion Card" on
page 92.
9
Run the appropriate online diagnostic test. See "Using Online Diagnostics"
on page 147.
If the tests fail, see "Getting Help" on page 157.
book.book Page 133 Wednesday, March 3, 2010 10:37 AM
To Next Page
Loading...
