iSCSI for TL-Series Tape Libraries
For Jumbo frames to function properly, the entire path between the back-up server to the stor-
age target needs to enable jumbo frames. Assuming a PowerConnect 5448 switch, this is done
as follows:
Figure 10 :
PowerConnect
5448
Select Advanced Settings and then General Settings.
Figure 11 :
General
Settings
The settings will then need to be saved to the Start-up Configuration and the switch rebooted.
Expand the System tree on the left pane, select Files, then Copy Files.
Figure 12 :
Copy Files
9
SEPTEMBER 2008
To Next Page
Loading...
