Table 40. System setup options—Storage menu (continued)
Storage
Enable MediaCard
Secure Digital (SD) Card Enable or disable the SD card.
By default, the Secure Digital (SD) Card option is enabled.
Secure Digital (SD) Card Read-Only Mode Enable or disable the SD card read-only mode.
By default, the Secure Digital (SD) Card Read-Only Mode option is not
enabled.
Table 41. System setup options—Display menu
Display
Display Brightness
Brightness on battery power Enable to set screen brightness when the computer is running on battery
power.
Brightness on AC power Enable to set screen brightness when the computer is running on AC power.
Full Screen Logo Enable or disable full screen logo.
By default, the option is not enabled.
Touchscreen Enable or disable the touchscreen for the operating system.
By default, the option is enabled.
Table 42. System setup options—Connection menu
Connection
Network Controller Configuration
Integrated NIC Controls the on-board LAN controller.
By default, the Enabled with PXE option is enabled.
Enable UEFI Network Stack Enable or disable UEFI Network Stack.
By default, the Enable UEFI Network Stack and Enabled w/PXE option are
enabled.
Wireless Device Enable
WWAN/GPS Enable or disable the internal WWAN/GPS device
By default, the option is enabled.
WLAN Enable or disable the internal WLAN device
By default, the option is enabled.
Bluetooth Enable or disable the internal Bluetooth device
By default, the option is enabled.
Contactless smartcard/NFC Enable or disable the internal Contactless smartcard/NFC device
By default, the option is enabled.
Enable UEFI Network Stack Enable or disable UEFI Network Stack and controls the on-board LAN
Controller.
By default, the Enable UEFI Network Stack option are enabled.
Wireless Radio Control
Control WLAN radio Sense the connection of the computer to a wired network and subsequently
disable the selected wireless radios (WLAN).
BIOS setup 137
To Next Page
Loading...
