Assembly inner frame
Removing the assembly-inner frame
CAUTION: The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the SIM card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the 4G WWAN card or 5G WWAN card, as applicable.
6. Remove the WLAN card.
About this task
The following images indicate the location of the assembly-inner frame and provide a visual representation of the removal
procedure.
Removing and installing Field Replaceable Units (FRUs) 71
To Next Page
Loading...
