Dell Precision 3580 - Coin-Cell Battery; Removing the Coin-Cell Battery

Steps
1. Using the alignment posts, place the left and right speakers into their slots on the palm-rest assembly.
2. Route the speaker cable through the routing guides on the palm-rest assembly.
3. Connect the speaker cable to the system board.
Next steps
1. Install the base cover.
2. Install the SIM card.
3. Follow the procedure in After working inside your computer.
Coin-cell battery
Removing the coin-cell battery
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the SIM card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the assembly-inner frame.
About this task
The following image(s) indicate the location of the coin-cell battery and provides a visual representation of the removal
procedure.
78
Removing and installing Field Replaceable Units (FRUs)