Screw list
NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE: Screw color may vary with the configuration ordered.
Table 32. Screw list
Component Screw type Quantity Screw image
5G WWAN bracket M2x3
1
5G WWAN thermal shield M2x3
2
M.2 2230 Solid-state drive in
Slot 1 and Slot 2
M2x3
1
Solid-state drive thermal shield
in Slot 1
M2x3
2
Assembly inner frame M2x3
12
System fan M2x4
2
Heat sink M2x4
1
Display cable M2x3
2
Type-C bracket M2x4
3
System board M2x3
3
Power button M2x2.5
2
Keyboard M2x2
21
Display assembly M2x3
2
Display panel M2.5x3.5
4
Display hinges M2.5x3.5
2
Fingerprint reader bracket M2x3
1
38 Working inside your computer
To Next Page
Loading...
