Dell Precision 3580 - Installing the M.2 2230 Solid-State Drive in Slot 2

2. Slide and lift the M.2 2230 solid-state drive off the solid-state drive slot.
Installing the M.2 2230 solid-state drive in Slot 2
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image(s) indicate the location of the M.2 2230 solid-state drive in Slot 2 and provides a visual representation of
the installation procedure.
Steps
1. Align the notch on the M.2 2230 solid-state drive with the tab on the M.2 2230 solid-state drive slot.
2. Slide the M.2 2230 solid-state drive into the M.2 2230 solid-state drive slot.
3. Replace the screw (M2x3) that secures the M.2 2230 solid-state drive to the palm-rest assembly.
Next steps
1. Install the base cover.
64
Removing and installing Customer Replaceable Units (CRUs)