Next steps
1. Install the base cover.
2. Install the SIM card.
3. Follow the procedure in After working inside your computer.
Removing the M.2 2230 solid-state drive from Slot 2
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the SIM card.
3. Remove the base cover.
About this task
The following image(s) indicate the location of the M.2 2230 solid-state drive in Slot 2 and provides a visual representation of
the removal procedure.
Steps
1. Remove the screw (M2x3) that secures the M.2 2230 solid-state drive to the palm-rest assembly.
Removing and installing Customer Replaceable Units (CRUs)
63
To Next Page
Loading...
