Table 47. System setup options—System Management menu (continued)
System Management
By default, the option is disabled.
Intel AMT Capability
Enable Intel AMT Capability Enable or disable Intel AMT capability.
By default, this option is set to Restrict Preboot Access.
First Power On Date
Set Ownership Date Enables to set the ownership date.
By default, this option is disabled.
Diagnostics
OS Agent Requests Enables or disables scheduling of onboard diagnostics on the subsequent boot.
By default, this option is enabled.
Power-on-Self-Test Automatic
Recovery
Enables or disables automatic recovery if the computer is unresponsive after
the BIOS Power-on-Self Test.
By default, this option is enabled.
Table 48. System setup options—Keyboard menu
Keyboard
Numlock Enable Enable or disable the Numlock function when the computer boots.
By default, the option is enabled.
Fn Lock Options By default, the Fn lock option is enabled.
Keyboard Illumination Enables to change the keyboard illumination settings.
By default, the Bright option is enabled.
Keyboard Backlight Timeout on AC Set the timeout value for the keyboard backlight when an AC adapter is
connected to the computer.
By default, the 10 seconds option is enabled.
Keyboard Backlight Timeout on
Battery
Set the timeout value for the keyboard backlight when the is running only on
battery power.
By default, the 10 seconds option is enabled.
Device Configuration Hotkey Access Manages whether you can access device configuration screens through
hotkeys during computer startup.
By default, the option is enabled.
Table 49. System setup options—Pre-boot Behavior menu
Pre-boot Behavior
Adapter Warnings
Enable Adapter Warnings Enable or disable the warning messages during boot when the adapters with
less power capacity are detected.
By default, the option is enabled.
Warning and Errors Enable or disable the action to be done when a warning or error is encountered.
By default, the Prompt on Warnings and Errors option is enabled.
Fastboot Enable to set the speed of the boot process.
By default, the Minimal option is enabled.
142 BIOS setup
To Next Page
Loading...
