5. Remove the 4G WWAN card or 5G WWAN card, as applicable.
6. Remove the WLAN card.
7. Remove the memory modules.
8. Remove the M.2 2230 or M.2 2280 solid-state drive from Slot 1.
9. Remove the M.2 2230 solid-state drive from Slot 2.
10. Remove the heat sink.
11. Remove the assembly inner frame.
12. Remove the system board.
About this task
The following images indicate the location of the keyboard and provide a visual representation of the removal procedure.
Removing and installing Field Replaceable Units (FRUs) 95
To Next Page
Loading...
