Table 43. System Setup options—Storage menu
Storage
SATA/NVMe Operation
SATA/NVMe Operation Sets the operating mode of the integrated SATA hard drive controller.
By default, the Raid On option is selected.
Storage Interface Displays the information of various onboard drives.
M.2 PCIe SSD-1 Displays the onboard device interface present in the platform for control.
M.2 PCIe SSD-2 Displays the onboard device interface present in the platform for control.
Smart Reporting
Enable Smart Reporting Enables or disables the Smart reporting option.
By default, the Smart Reporting option is disabled.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Drive Information Displays the information of onboard drives.
Enable MediaCard
Secure Digital (SD) Card Enables or disables the SD card.
By default, the Secure Digital (SD) Card option is enabled.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Secure Digital (SD) Card Read-Only Mode Enables or disables the SD card read-only mode.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
By default, the Secure Digital (SD) Card Read-Only Mode option is disabled.
Table 44. System Setup options—Display menu
Display
Display Brightness
Brightness on battery power Enables to set the screen brightness when the computer is running on battery
power.
By default, the screen brightness is set to 50 when the computer is running on
battery power.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Brightness on AC power Enables to set the screen brightness when the computer is running on AC power.
By default, the screen brightness is set to 100 when the computer is running on
AC power.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Full Screen Logo Enables or disables the computer to display full screen logo, if the image matches
screen resolution.
By default, the Full Screen Logo option is disabled.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
146 BIOS Setup
To Next Page
Loading...
