Table 45. System Setup options—Connection menu(continued)
Connection
HTTP(s) Boot When enabled, supports HTTP(s) boot on the client BIOS, which offers wired or
wireless and HTTP/HTTPS connection options.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
HTTP(s) Boot Modes In Auto Mode, the boot URL is obtained from the DHCP response; the boot URL
specifies the HTTP Boot Server and location of the Network Boot Program (NBP)
file. In Manual mode, the user enters the URL in the text box, which must start
with http:// or https:// and end with the NBP file name.
By default, Auto Mode is selected.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Boot URL
Certificate Upload or delete the certificate.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Table 46. System Setup options—Power menu
Power
Battery Configuration
Battery Configuration Enables or disables the computer to run on battery during peak power usage
hours. Use the table Custom Charge Start and Custom Charge Stop, to
prevent AC power usage between certain times of each day.
By default, the Adaptive option is selected. Battery settings are adaptively
optimized based on your typical battery usage pattern.
Custom Charge Start Enables you to set the Custom Charge Start value.
Default value: 50
Custom Charge Stop Enables you to set the Custom Charge Stop value.
Default value: 90
Advanced Configuration
Enable Advanced Battery Charge
Configuration
Enables Advanced Battery Charge Configuration from the beginning of the day
to a specified work period. When enabled, Advanced Battery Charged maximizes
battery health while still supporting heavy use during the work day.
By default, the Enable Advanced Battery Charge Configuration option is
disabled.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Peak Shift
Enable Peak Shift Enables or disables the computer to run on battery during peak power usage
hours.
By default, the Enable Peak Shift option is disabled.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
USB PowerShare
Enable USB PowerShare Enables or disables the USB PowerShare on the computer.
148 BIOS Setup
To Next Page
Loading...
